Spherical Guide Bushing Set DF/DA
FeaturesFeatures: It can safely and stably fix theinclined push rod, saving the space of the ejector plate; DA can adjust theheight of the push rod.Product details...
Standard components
Spherical Guide Bushing Set IF/VI
FeaturesFeatures: The inclined top rod is matchedwith the self-lubricating guide sleeve, and the movement is smooth. Afterspecial hardening, the forming block has good wear resistance and can be usedfor a long time. It is easy to install and optimize the mold structure.Product details...
Spherical Guide Bushing Set SD
FeaturesFeatures: The inclined top rod is matchedwith the self-lubricating guide sleeve, and the movement is smooth. Afterspecial hardening, the forming block has good wear resistance and can be usedfor a long time. It is easy to install and optimize the mold structure.Product details...
Inclined top ULB
FeaturesFeatures: Used in conjunction with ULG andULC, the length of the slanted top can be customized.Product details...
Slide core units ULC/Slidie block ULG
FeaturesFeatures:Crescent-shaped guide rails allow the angled slider to be at any angle.Product details...
Accelerates ejector AEP AEB
FeaturesFeatures: This product uses gear and rackrotation mechanism to provide an additional ejection stroke of 15.8mm or more.Simple to linear motion increases the stroke speed of the ejector pin, thecylinder needle and the entire ejector unit; during the ejection and returnstrokes, it provides a smooth motion without...
Accelerates ejector AK0-1
FeaturesFeatures: Accelerated top stick design issimple, with pivoting action for ejector mechanism 1:1, they are suitable forthimbles up to 3/8 diameter, (top pins with a diameter of more than 5/8 can bepolished for zone matching) Simple design allows The acceleration top stick canbe pushed into the board or installed...
Accelerates ejector Z141
FeaturesFeatures: A thimble can be installed toincrease the extra ejection stroke during the ejection process; theinstallation space is small and the cost is saved.Product details...
Plate accelerator EP
FeaturesFeatures: Easy assembly can achieve goodacceleration effect, small installation space and optimized mold structure.Product details...
Accelerates ejector AE
FeaturesFeatures: It can hold and fix one thimble,which can increase the extra 8mm or 15mm secondary ejection of relative stroketo help the product fall off; the head has a small hole, which can be insertedwith a fixed needle to prevent the thimble from rotating; Small space, costsaving, and optimized mold structure.Pr...