Parting lock PL/Z172
FeaturesFeatures: By locking the taper screw, the friction between the template and the nylon can be adjusted; it has good wear and heat resistance.Product details...
Standard components
Magnetic lock MLK
FeaturesFeatures: Compared with other clamping buckles, it is easier to install and requires less speed reduction during mold clamping, thus shortening the molding cycle.Product details...
Magnetic lock MLKC
FeaturesFeatures: Compared with other clamping buckles, it is easier to install and requires less speed reduction during mold clamping, thus shortening the molding cycle.Product details...
Latch lock TYPE
FeaturesFeatures: In the mold processing, the same stroke symmetrical installation must be calculated, otherwise the single set of clamping buckles will be unbalanced and the components will be broken.Product details...
Latch lock PLSW
FeaturesFeatures: Through the hook-shaped locking pin, the structure of the repetitive action of the bolt makes the product small and saves the installation space, and can also be used for the ejection board to eject.Product details...
Carousel lock MPLK/MPLKS
FeaturesFeatures: butterfly-shaped shrapnel and roller pin structure, with good stability in the mold opening process; the locking sleeve structure is symmetrical, if one of them becomes worn, it can be used again after being installed upside down.Product details...
Latch lock PLS/PLM/PLL
FeaturesFeatures: This product has a small structure, correct mold opening, no reaction. There is no clamping load at all, it can be used for low-pressure clamping molding. Its action is independent of the clamping sequence. When the flow channel plate is first divided into the parting surface, the locking block functi...
Latch lock LL
FeaturesFeatures: Eliminates the possibility of breaking the mold, because there is no need for any changeable adjustments or links that may be accidentally knocked out. Suitable for general or heavy-duty molds, each mold requires a minimum of four clamping buckles.Product details...
Latch lock GS
FeaturesLatch lock GS Latch lock GSThe independent design and precise scale ensure high precision in the first opening of the mold; it is more cost effective than the traditional clamping buckle and optimizes the mold structure.Product details...
Latch lock Z171/1
FeaturesFeatures: mechanical interlock design, safe and reliable; this clamping buckle not only has the function of controlling the mold opening sequence, but also can control the clamping sequence; the tail of the plunger is processed by high-frequency annealing to facilitate the secondary processing of the mounting h...